C & L New Model CL-2 Pictures

[Chipaputt]

Hello,
Here are more pictures of our CL-2 putter right off the mill.
Thanks,
Chip & Lee

[littlepingman]

Very nice!!

[braithwaite]

Looking good guys!

[carfangia]

Can wait to get my hands on one of those>>>

[outgolfing]

Just ordered mine last week.  Cant wait for it to get here!

[Tarheeldwg]

Looking good!!!

[jballmn]

Beautiful!!

[edwelly]

Chip - I sent you my specs for a new CL-2 last night. Looking forward to working with you again on my new putter!

[simmons_m]

ran across this post tonight.  Looks great Chip & Lee,
Mike

[golftech]

Was the current FN-1 Model the old CL-2 model? 

[hoganapex]

Was the current FN-1 Model the old CL-2 model? 

Yes,
 we changed it up a little bit.   We currently have the CL-I (our first putter), the CL-II (trisole w/flat bumpers), CL-FN (flowneck),
 the CL-M (Mallet), and possibly a new one called the CL-B  before too long


Lee

[Auld Grey Loon]

Lee

The CL-B has got me intrigued. It would not be a Ping B60 inspired model or have I got the wrong end of the stick on this one. Most of the milled putter makers have stayed away from this area, it would be great if someone stepped up and plugged this gap in the market.

Cheers
Dave
 

[Herd8497]

Lee

The CL-B has got me intrigued. It would not be a Ping B60 inspired model or have I got the wrong end of the stick on this one. Most of the milled putter makers have stayed away from this area, it would be great if someone stepped up and plugged this gap in the market.

Cheers
Dave
 

I agree Dave. I have used a B60 and the Circa 6, but both were too light for my liking.  My fingers are crossed that the CL-B will be a 100% milled head of similar fashion with 350g+ headweights.

Jay

[golftech]

Was the current FN-1 Model the old CL-2 model? 

Yes,
 we changed it up a little bit.   We currently have the CL-I (our first putter), the CL-II (trisole w/flat bumpers), CL-FN (flowneck),
 the CL-M (Mallet), and possibly a new one called the CL-B  before too long


Lee

Thanks, what the availability of that model right now in carbon steel (CL-FL)?  Can that wide flowing neck be made in minimal offset (between 1/4 and no offset)?
Thanks,

[hoganapex]

yes, we can bend the flowneck for less offset.  Won't be zero offset, but should be able to get you at 1/4.  we have them in stock in carbon with or without floating face.

thanks

lee

Was the current FN-1 Model the old CL-2 model? 

Yes,
 we changed it up a little bit.   We currently have the CL-I (our first putter), the CL-II (trisole w/flat bumpers), CL-FN (flowneck),
 the CL-M (Mallet), and possibly a new one called the CL-B  before too long


Lee

Thanks, what the availability of that model right now in carbon steel (CL-FL)?  Can that wide flowing neck be made in minimal offset (between 1/4 and no offset)?
Thanks,

[deh39]

Sign me up for the first run of the CL-2 in lefty.  Also please let there be a carbon lefty run soon.